Narzędzie do obliczeń hydraulicznych
Z poniższego menu wybierz, co chcesz obliczyć. Należy pamiętać, że liczby dziesiętne są oddzielane kropką (np. 1,5) oraz że obliczenia te służą wyłącznie do uzyskania przybliżonych wyników. Firma PMC Hydraulics Group AB nie ponosi odpowiedzialności za skutki ewentualnych błędów w wzorach i oprogramowaniu.
Hydraulic calculations
The calculations below must only be used to obtain estimates. PMC Hydraulics Group accepts no liability for the consequences that any errors in formulas and software may have.
Pump
Result
Motor
Result
Cylinder
Result
| Pushing | Pulling | Diff. | Unit | |
|---|---|---|---|---|
| Area | cm² | |||
| Ratio | ||||
| Volume | l | |||
| Force | ton | |||
| Stroke time | s | |||
| Velocity | mm/s | |||
| Return flow | l/min | |||
Accumulator
Leave one of accumulator volume, working volume, or pre-charge pressure blank to solve for it.
Result
The blank field is filled with the calculated value.
Pipe
Result
Pressure drop
Calculations apply to orifices where the diameter exceeds the length of the constriction. Oil density used: 870 kg/m³, discharge coefficient: 0.7. Leave one field blank to solve for it.
Result
The blank field is filled with the calculated value.
Temperature development in tank
Result
Decompression time
Result
Throttling diameter
Result
Unit conversion
Enter a value on either side, the other side updates automatically.
| Metric | Imperial | |||
|---|---|---|---|---|
| Pressure | bar | psi | ||
| Power | kW | hp | ||
| Length | mm | inch | ||
| Volume | cm³ | inch³ | ||
| Capacity | l | US gal | ||
| Temperature | °C | °F |